Recursive Approach to the Design of a Parallel Self Timed Adder
Abstract
References
D. Geer, “Is it time for clockless chips? [Asynchro-nous processorchips],†IEEE Comput., vol. 38, no. 3, pp. 18–19, Mar. 2005.
J. Sparsø and S. Furber, Principles of Asynchronous Circuit Design.Boston, MA, USA: Kluwer Academic, 2001.
P. Choudhury, S. Sahoo, and M. Chakraborty, “Im-plementation of basicarithmetic operations using cel-lular automaton,†in Proc. ICIT, 2008,pp. 79–80.
M. Z. Rahman and L. Kleeman, “A delay matched approach forthe design of asynchronous sequential circuits,†Dept. Comput.Syst.Technol., Univ. Malaya, Kuala Lumpur, Malaysia, Tech. Rep. 05042013,2013.
M. D. Riedel, “Cyclic combinational circuits,†Ph.D. dissertation, Dept.Comput. Sci., California Inst. Tech-nol., Pasadena, CA, USA, May 2004.
R. F. Tinder, Asynchronous Sequential Machine Design and Analysis:A Comprehensive Development of the Design and Analysis ofClock-Independent State Machines and Systems. San Mateo, CA, USA:Morgan, 2009.
W. Liu, C. T. Gray, D. Fan, and W. J. Farlow, “A 250- MHz wavepipelined adder in 2-μm CMOS,†IEEE J. Sol-id- State Circuits, vol. 29,no. 9, pp. 1117–1128, Sep. 1994.
F.-C. Cheng, S. H. Unger, and M. Theobald, “Self-timed carry-lookaheadadders,†IEEE Trans. Comput., vol. 49, no. 7, pp. 659–672, Jul. 2000.
S. Nowick, “Design of a low-latency asynchronous adder using speculativecompletion,†IEE Proc. Comput. Digital Tech., vol. 143, no. 5,pp. 301–307, Sep. 1996.
N. Weste and D. Harris, CMOS VLSI Design: A Cir-cuits and SystemsPerspective. Reading, MA, USA: Ad-dison- Wesley, 2005.
C. Cornelius, S. Koppe, and D. Timmermann, “Dy-namic circuit techniquesin deep submicron technolo-gies: Domino logic reconsidered,†inProc. IEEE ICICDT, Feb. 2006, pp. 1–4. 2
M. Anis, S. Member, M. Allam, and M. Elmasry, “Im-pact of technologyscaling on CMOS logic styles,†IEEE Trans. Circuits Syst., AnalogDigital Signal Process., vol. 49, no. 8, pp. 577–588, Aug. 2002.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.
Â